I found this:
ESP-IDF vs Arduino Framework: Best Framework for ESP32-S3 Development.
https://youtu.be/O-7rPkya4Yw?si=RXYms3a-rAEXvoRl
Search found 134 matches
- Sat Apr 06, 2024 7:50 pm
- Forum: Sample Code
- Topic: ESP32 IDF Benchmark
- Replies: 6
- Views: 26196
- Sat Apr 06, 2024 7:39 pm
- Forum: Hardware
- Topic: microSD with spi socket schematic
- Replies: 1
- Views: 1380
Re: microSD with spi socket schematic
You may merge these circuits. Esp32-c6-devkitm-1/schematics https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/_static/esp32-c6-devkitc-1/schematics/esp32-c6-devkitc-1-schematics_v1.3.pdf ESP32-LyraT-Mini V1.2 Hardware Reference (with micro SD card) https://dl.espressif.com/dl/sche...
- Sat Apr 06, 2024 7:13 pm
- Forum: Hardware
- Topic: Arduino IDE will not detect a port to an ESP32 Dev Module
- Replies: 2
- Views: 1300
- Fri Apr 05, 2024 3:05 am
- Forum: ESP32 Arduino
- Topic: ESP32 C3 Development Board wont print to serial monitor
- Replies: 9
- Views: 9762
Re: ESP32 C3 Development Board wont print to serial monitor
HardwareSerial.h 2.0.6 not work with code 2.0.5 https://github.com/espressif/arduino-esp32/issues/7706 https://github.com/espressif/arduino-esp32/issues/7706#issuecomment-1430601741 I achieve serial communication using the Coolterm program. https://learn.sparkfun.com/tutorials/terminal-basics/coolt...
- Fri Apr 05, 2024 2:49 am
- Forum: ESP32 Arduino
- Topic: [ESP32 Dev Kit] ADC pin readings always HIGH with external battery connected
- Replies: 3
- Views: 1448
Re: [ESP32 Dev Kit] ADC pin readings always HIGH with external battery connected
Caution!
LIPO Battery voltage when fully charged is about 4.2V !! Not 3.7V.
Measure the battery voltage with a voltmeter.
LIPO Battery voltage when fully charged is about 4.2V !! Not 3.7V.
Measure the battery voltage with a voltmeter.
- Fri Apr 05, 2024 2:17 am
- Forum: ESP32 Arduino
- Topic: ESP32S3 Unable to set specific GPIO as outputs
- Replies: 8
- Views: 2551
Re: ESP32S3 Unable to set specific GPIO as outputs
What is the ESP32 S3 module model? Caution! May be inappropriate use of GPIO37. ESP32S3 GPIO restrictions : Strapping pin: GPIO0, GPIO3, GPIO45 and GPIO46 are strapping pins. SPI0/1: GPIO26-32 are usually used for SPI flash and PSRAM and not recommended for other uses. When using Octal Flash or Octa...
- Fri Apr 05, 2024 1:53 am
- Forum: ESP-IDF
- Topic: communication with cp210x
- Replies: 3
- Views: 1353
Re: communication with cp210x
This device does not appear to be a CP2102.
CP2102 => VID: 0x10C4 and PID: 0xEA60 or 0xEA70
Reference:
https://www.silabs.com/documents/public ... /AN571.pdf
What device is it?
idVendor 0x10c4
idProduct 0x8056
CP2102 => VID: 0x10C4 and PID: 0xEA60 or 0xEA70
Reference:
https://www.silabs.com/documents/public ... /AN571.pdf
What device is it?
idVendor 0x10c4
idProduct 0x8056
- Fri Apr 05, 2024 1:34 am
- Forum: General Discussion
- Topic: Is it possible to maintain 3 different bluetooth connections?
- Replies: 1
- Views: 1426
Re: Is it possible to maintain 3 different bluetooth connections?
I have a keyboard that changes bluetooth devices, but it does so slowly, disconnecting from one device and connecting to another, which takes 3 seconds and sometimes doesn't even work. The connecting and pairing process usually takes a few seconds, with any BLE device. See this: https://github.com/...
- Fri Apr 05, 2024 1:31 am
- Forum: General Discussion
- Topic: Bluetooth pairing with a linux desktop - any success?
- Replies: 1
- Views: 1337
- Fri Apr 05, 2024 1:07 am
- Forum: General Discussion
- Topic: CAN controller not working in new devices
- Replies: 3
- Views: 1478
Re: CAN controller not working in new devices
Your code is based on Arduino or ESP-IDF?
Some new version of the IDE may have changed the code for the CAN protocol.
Compile your program with the old version of the IDE.
Some new version of the IDE may have changed the code for the CAN protocol.
Compile your program with the old version of the IDE.