Hello, Thank you 6l3nhx. Nice workaround ! Works perfectly. I made it with timer and disabling the image validation this ack takes 10µWh instead of 20µWh for RF calibration but max current is 50mA instead of 350mA ^^ Battery powered device under -20°C thank you :) void app_main(void) { ++bootCount; ...

Hello, From documentation ( https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/api-guides/RF_calibration.html?highlight=calibration ) RF calibration is not supposed to occur after wake-up from deep sleep as long as phy calibration data is available in NVS. I use same code with former ESP3...

Nobody ?

Any support ?

Hello all, I'm using esp32 only for wifi scan (no connection) and I'd like to minimise the inrush current at start-up. I've used 1ohm shunt to measure current at first start-up and found that depending on the antenna situation the RF calibration takes different time : about 15ms when touched with fi...

Hello,

Any update ?

From my understanding the actual datasheet is not 100% perfect between module dimensions and land pattern.
The land pattern exposed pad center is (x=8 y=10.51 from corner) and the exposed pad center on module is (x=7.5 y=10.3 from corner).

Hello all, I'd like to use ESP32-WROOM-32 module only to scan Wi-Fi (for now). I've seen that the deep-sleep current is about 5uA which sounds OK but what would be of great interest is the amount of energy (in mAh for example) that takes the entire operation : wake-up, scan WiFi, go to sleep. On ano...