Search found 90 matches
- Tue Aug 01, 2017 12:23 am
- Forum: ESP32 Arduino
- Topic: Can't connect ESP32 to MQTT Broker (Mosquitto)
- Replies: 2
- Views: 13166
Re: Can't connect ESP32 to MQTT Broker (Mosquitto)
I just tried the code from the tutorial, modified only to comment out the DHT code, and use a random number for temperature. Installed mosquitto on a Raspberry Pi. Installed android app on my phone. Works fine here, temperature updates display correctly on my phone. No error messages in serial monit...
- Wed Jul 26, 2017 5:05 am
- Forum: ESP32 Arduino
- Topic: How to use a "Standalone" html page for this example (ESP32 Arduino)
- Replies: 5
- Views: 14665
Re: How to use a "Standalone" html page for this example (ESP32 Arduino)
Yes, you can serve HTML files. Of course, you'll need to learn how to use the file system, and how to handle file operations like create,read,write,etc. There's a lot to learn, and you won't learn it all by asking on forums. School is good, and books. Probably easier to start with a real OS, Raspber...
- Wed Jul 26, 2017 1:43 am
- Forum: ESP32 Arduino
- Topic: Interrupts being triggered by AC Load when pull resistor is connected
- Replies: 12
- Views: 19856
Re: Interrupts being triggered by AC Load when pull resistor is connected
Is the assumption that this is caused by electromagnetic interference, and NOT by noise or sag in the power line?
- Tue Jul 25, 2017 5:21 am
- Forum: ESP32 Arduino
- Topic: Problem to get the ip address on this example.
- Replies: 4
- Views: 6342
Re: Problem to get the ip address on this example.
Just to be clear - are you saying it isn't getting to the loop checking WiFi status?
Works at home, not at office? Different make/model of WiFi access points?
Works at home, not at office? Different make/model of WiFi access points?
- Fri Jul 21, 2017 2:45 pm
- Forum: ESP32 Arduino
- Topic: Simple audio with DAC
- Replies: 7
- Views: 28693
Re: Simple audio with DAC
Going back to your first attempt, exactly how were you doing delay of .125? That should work, if you use delayMicroseconds(125).
If you use delay(0.125), the float 0.125 will be silently converted to int 0 , and it won't work.
If you use delay(0.125), the float 0.125 will be silently converted to int 0 , and it won't work.
- Mon Jul 17, 2017 1:29 am
- Forum: ESP32 Arduino
- Topic: Wifi - SimpleWifiServer hangs upon trying to connect to wifi network
- Replies: 3
- Views: 6253
Re: Wifi - SimpleWifiServer hangs upon trying to connect to wifi network
I'd try running WiFiScan to verify that radio reception works, then try connecting to an open AP.
But, of course, your device may be defective.
But, of course, your device may be defective.
- Sat Jul 15, 2017 6:05 pm
- Forum: ESP32 Arduino
- Topic: Wifi - SimpleWifiServer hangs upon trying to connect to wifi network
- Replies: 3
- Views: 6253
Re: Wifi - SimpleWifiServer hangs upon trying to connect to wifi network
I just ran SimpleWiFiServer here, works as expected.
Did you set your ssid and password correctly?
Did you set your ssid and password correctly?
- Thu Jul 13, 2017 2:46 pm
- Forum: ESP32 Arduino
- Topic: Preference fetchString not working..... user error?
- Replies: 2
- Views: 5536
Re: Preference fetchString not working..... user error?
At the very least, your final snippet doesn't allocate any space for
char * s;
So, s is a pointer which doesn't point to any storage.
char * s;
So, s is a pointer which doesn't point to any storage.
- Fri Jul 07, 2017 5:35 am
- Forum: ESP32 Arduino
- Topic: Capacitive touch.
- Replies: 2
- Views: 8673
Re: Capacitive touch.
Reading a capacitive touch pin returns an analog value which varies with capacitance. To use it, compare that value to a threshold.
Note: they don't all return the same value when not being touched, so I'd use a few reads to calibrate the threshold value.
Note: they don't all return the same value when not being touched, so I'd use a few reads to calibrate the threshold value.
- Sun Jul 02, 2017 3:44 am
- Forum: ESP32 Arduino
- Topic: ESP32 I2C not setting up
- Replies: 3
- Views: 8245
Re: ESP32 I2C not setting up
Have you tried any other pins?
I just got a Nodemcu 32S a few days ago, and have had success using I2C on 33=SDA, 32= SCL, running an SSD1306 128x64 OLED display.
-Robert
I just got a Nodemcu 32S a few days ago, and have had success using I2C on 33=SDA, 32= SCL, running an SSD1306 128x64 OLED display.
-Robert