你可以直接在 ESP8266 的 GitHub 提问看看
https://github.com/espressif/ESP8266_RTOS_SDK
https://github.com/espressif/ESP8266_NONOS_SDK
Search found 71 matches
- Fri Mar 29, 2019 9:09 am
- Forum: ESP-IDF 中文讨论版
- Topic: esp8266的问题可以放在这里讨论吗?
- Replies: 2
- Views: 5618
- Fri Mar 29, 2019 9:01 am
- Forum: General Discussion
- Topic: ESP32 AT command BT CLASSIC
- Replies: 2
- Views: 3543
Re: ESP32 AT command BT CLASSIC
I also use the BT classic, but never met data loss. Maybe you can connect the UART CTS, RTS, enable the UART flow control and try it again. To see if it is the UART that lost data.
- Sun Mar 24, 2019 7:03 am
- Forum: General Discussion
- Topic: ESP32 WROVER not responding for AT commands.
- Replies: 5
- Views: 9279
Re: ESP32 WROVER not responding for AT commands.
Have you tried the ESP Flash Download Tool? Maybe you can erase the entire flash firstly and then download the firmware into it.
After downloading the ESP32_AT Bin, in the "factory" folder, there is an AT bin for ESP32-WROVER, you can download it into the address 0. AT baud rate is 115200.
After downloading the ESP32_AT Bin, in the "factory" folder, there is an AT bin for ESP32-WROVER, you can download it into the address 0. AT baud rate is 115200.
- Mon Mar 11, 2019 6:04 am
- Forum: ESP IoT Solution
- Topic: AT commands for BLE throws error
- Replies: 5
- Views: 8299
Re: AT commands for BLE throws error
There are two ways to upgrade the AT firmware:
1. FOTA: Connect the ESP32 to a router to access the internet, call command "AT+CIUPDATE" for upgrading.
2. Flashing the board: Download one of the bins in the ESP32_AT/factory directory to address 0x0.
1. FOTA: Connect the ESP32 to a router to access the internet, call command "AT+CIUPDATE" for upgrading.
2. Flashing the board: Download one of the bins in the ESP32_AT/factory directory to address 0x0.
- Fri Mar 08, 2019 7:13 am
- Forum: ESP-IDF
- Topic: esp-at v1.2 with SparkFun ESP32 Thing
- Replies: 1
- Views: 2785
Re: esp-at v1.2 with SparkFun ESP32 Thing
AT command is via GPIO16, GPIO17 by default. Could it due to the wrong pins?
- Fri Mar 08, 2019 7:11 am
- Forum: ESP-IDF
- Topic: esp32-at wifi access point web server very slow
- Replies: 3
- Views: 4975
Re: esp32-at wifi access point web server very slow
It is hard to tell. Maybe due to the bad network? It needs the captured Wi-Fi packets for further analyzing. Wireshark or omnipeek, both are fine.
- Tue Mar 05, 2019 6:32 am
- Forum: ESP IoT Solution
- Topic: Interface other than AT command through UART IO
- Replies: 2
- Views: 4894
Re: Interface other than AT command through UART IO
Maybe you can follow the BLE example on GitHub to run the BLE AT commands.
- Tue Mar 05, 2019 3:34 am
- Forum: ESP IoT Solution
- Topic: AT commands for BLE throws error
- Replies: 5
- Views: 8299
Re: AT commands for BLE throws error
In the ESP32_AT/factory is the combined bins for different ESP32 module. You can download one of them according to your actual module.
- Tue Mar 05, 2019 2:11 am
- Forum: ESP-IDF
- Topic: esp32-at wifi access point web server very slow
- Replies: 3
- Views: 4975
Re: esp32-at wifi access point web server very slow
Does it due to the bad network? Have you captured the WiFi packets for further analyzing?
- Mon Mar 04, 2019 8:14 am
- Forum: General Discussion
- Topic: AT firmware Hostname error
- Replies: 1
- Views: 2826
Re: AT firmware Hostname error
Could you list the AT commands you used?