Which ESP32 module would you recommend for power measurement?

akris11
Posts: 5
Joined: Wed Jun 28, 2017 4:06 am

Which ESP32 module would you recommend for power measurement?

Postby akris11 » Wed Jun 28, 2017 4:10 am

I am looking for a ESP32 based module with scope for power measurement.
Would like to power up the ESP32 from a external power source and do some power analysis..

Which board do you guys recommend?

User avatar
hydrabus
Posts: 29
Joined: Wed Nov 25, 2015 11:45 pm
Location: France
Contact:

Re: Which ESP32 module would you recommend for power measurement?

Postby hydrabus » Sun Jul 02, 2017 3:19 pm

I would recommend HydraESP32v1.1 Rev1.0 (with ESP-WROOM-32) see link here https://hydrabus.com/2016/11/16/hydraes ... -is-alive/
  • It is heavily recommended to solder also the big GND (on center) of the ESP-WROOM-32 for heat dissipation in case you use everything Wifi+BLE+Dual Core@240MHz...
  • It is also heavily recommended to solder the LDO with capacitor for a good stability on the +3v3 (those components are not mandatory if you have a good external power supply)
  • You can cut the PCB to use it without HydraBus, this board is designed to be simple in order to measure power consumption ...

User avatar
loboris
Posts: 514
Joined: Wed Dec 21, 2016 7:40 pm

Re: Which ESP32 module would you recommend for power measurement?

Postby loboris » Sun Jul 02, 2017 7:36 pm

You can use any ESP32 module and attach some I2C Power Monitor Sensor like:
https://www.ebay.com/sch/i.html?_odkw=C ... c&_sacat=0
or
https://www.ebay.com/sch/i.html?_odkw=I ... 6&_sacat=0

Who is online

Users browsing this forum: No registered users and 55 guests