Which ESP32 module would you recommend for power measurement?
Posted: Wed Jun 28, 2017 4:10 am
by akris11
I am looking for a ESP32 based module with scope for power measurement.
Would like to power up the ESP32 from a external power source and do some power analysis..
Which board do you guys recommend?
Re: Which ESP32 module would you recommend for power measurement?
Posted: Sun Jul 02, 2017 3:19 pm
by hydrabus
I would recommend HydraESP32v1.1 Rev1.0 (with ESP-WROOM-32) see link here
https://hydrabus.com/2016/11/16/hydraes ... -is-alive/
- It is heavily recommended to solder also the big GND (on center) of the ESP-WROOM-32 for heat dissipation in case you use everything Wifi+BLE+Dual Core@240MHz...
- It is also heavily recommended to solder the LDO with capacitor for a good stability on the +3v3 (those components are not mandatory if you have a good external power supply)
- You can cut the PCB to use it without HydraBus, this board is designed to be simple in order to measure power consumption ...
Re: Which ESP32 module would you recommend for power measurement?
Posted: Sun Jul 02, 2017 7:36 pm
by loboris