Re: Camera
Posted: Sun Jan 08, 2017 10:44 am
I want to be as closed as possible to Krzysztofs
great
https://github.com/krzychb/esp32-cam-demo#connect ;
Only want to port the idf-project to Arduino-IDE without freeRTOS.
The famous DMA-transfer is good to look at for further use.
I think i would do the reading out of the GRAM-Display with this.
With a function "snapshoot" (triggered by touch) that contents will be saved at an SD-card.
At the moment i struggle with one line in the code:
timer_conf.bit_num = 3;
in function:
static void enable_out_clock();
I've to learn more about PERIPH_LEDC_MODULE..
great
https://github.com/krzychb/esp32-cam-demo#connect ;
Only want to port the idf-project to Arduino-IDE without freeRTOS.
The famous DMA-transfer is good to look at for further use.
I think i would do the reading out of the GRAM-Display with this.
With a function "snapshoot" (triggered by touch) that contents will be saved at an SD-card.
At the moment i struggle with one line in the code:
timer_conf.bit_num = 3;
in function:
static void enable_out_clock();
I've to learn more about PERIPH_LEDC_MODULE..