ESP32-S3FH4R2 footprint (PCB land pattern)

Sansveni
Posts: 1
Joined: Tue Nov 22, 2022 3:00 pm

ESP32-S3FH4R2 footprint (PCB land pattern)

Postby Sansveni » Tue Nov 22, 2022 3:23 pm

Hi,

I need help with a recommended footprint for the QFNWB (7x7 mm) package used in the ESP32-S3FH4R2, per esp32-s3_datasheet_en.pdf v1.4. I was previously using the ESP32-S3-WROOM-1_V1.3_Reference_Design Gerbers as a reference, however the ESP32-S3FH4R2 has a different package with a much bigger ground pad. This is concerning because this probably means I can't route vias/traces underneath the chip.

I can't find a reference design that has the ESP32-S3FH4R2, has one been released yet? If not, when is that expected to be available? Thanks.

MurphyMo
Posts: 1
Joined: Wed Nov 17, 2021 8:19 am

Re: ESP32-S3FH4R2 footprint (PCB land pattern)

Postby MurphyMo » Mon Nov 28, 2022 6:41 am

Hi Sansveni,

I am sorry that currently, we have no reference design for ESP32-S3FH4R2, and there is no scheduled release plan either in the near future. You may just refer to the existing reference design documents for other ESP32-S3 series chips, like what you are already doing.

If you meet with any technical problem, please leave reply and we will follow up on the issue!

Who is online

Users browsing this forum: No registered users and 61 guests