ESP32 with ATECC608A

GerryTitan
Posts: 25
Joined: Mon Oct 15, 2018 2:10 am

ESP32 with ATECC608A

Postby GerryTitan » Mon Jan 28, 2019 4:50 pm

Hello,

I am trying to configure the ESP32 with ATECC608. My goal is to connect to AWS over a TLS connection. However, I would like to utilize the HW acceleration/security features of the ECC608 during the TLS handshake (specifically, the ECDSA signature verification).

It would be preferable to use either Arduino IDE or ESP-IDF for this process, since I already have an AWS project set up in these environments. Configuring with ECC508 would also be okay, since the procedure should be the same.

Basically, I just want to know if anyone has any experience communicating with the ECC608/508 with the ESP32, and if they could help point me in the right direction.

Thanks in advance.

mohasrj
Posts: 2
Joined: Mon Jan 20, 2020 9:38 am

Re: ESP32 with ATECC608A

Postby mohasrj » Wed Jan 29, 2020 9:58 am

hi sir,

to u have news me too i want to use ATECC608A with ESP32 ?

ESP_flying_raijin
Posts: 1
Joined: Tue Aug 13, 2019 2:03 pm

Re: ESP32 with ATECC608A

Postby ESP_flying_raijin » Thu Jan 30, 2020 12:44 pm

Hi @GerryTitan @mohasrj , Thanks for the request,
Actually we are currently developing an example on how to use ATECC608A with ESP32 ( i.e. ESP32-WROOM32-SE), The example is nearly complete, and by the next week we will be able to provide you the preview of the example which you will be able to build and test with your application.

GerryTitan
Posts: 25
Joined: Mon Oct 15, 2018 2:10 am

Re: ESP32 with ATECC608A

Postby GerryTitan » Sat Feb 08, 2020 1:30 am

Thanks for the response. I have actually succeeded in pairing with the ECC608 since my initial post. :)

JAHTKELD
Posts: 2
Joined: Tue Jul 02, 2019 8:51 am

Re: ESP32 with ATECC608A

Postby JAHTKELD » Mon Feb 10, 2020 12:17 pm

ESP_flying_raijin wrote:
Thu Jan 30, 2020 12:44 pm
Hi @GerryTitan @mohasrj , Thanks for the request,
Actually we are currently developing an example on how to use ATECC608A with ESP32 ( i.e. ESP32-WROOM32-SE), The example is nearly complete, and by the next week we will be able to provide you the preview of the example which you will be able to build and test with your application.
293/5000
I am trying to provision Azure with ATECC608A and ESP32. At the moment I am following the example https://github.com/kmwebnet/ECC608-AzureIoT-Connect but there are misdirected libraries. Now I am trying in my environment with Eclipse and ESP-IDF and Azure-SDK, but I have not yet achieved

AngelVer
Posts: 1
Joined: Thu Mar 12, 2020 10:54 am

Re: ESP32 with ATECC608A

Postby AngelVer » Thu Mar 12, 2020 10:57 am

Hi,

@ESP_flying_raijin where can I found that example?

Who is online

Users browsing this forum: Baidu [Spider] and 6 guests