The partition table is as below and I'm getting a "Passive OTA partition not found" after the call to
Code: Select all
esp_https_ota(&config)
What am I doing wrong?
Thanks in adance!
partition.csv
Code: Select all
# Name, Type, SubType, Offset, Size, Flags
nvs, data, nvs, 0x9000, 0x4000,
otadata, data, ota, 0xd000, 0x2000,
phy_init, data, phy, 0xf000, 0x1000,
factory, 0, 0, 0x10000, 1M,
ota_0, 0, ota_0, 0x110000, 1M,
ota_1, 0, ota_1, 0x210000, 1M,
Code: Select all
I (4706) esp_https_ota: Starting OTA...
E (4706) esp_https_ota: Passive OTA partition not found
E (4706) HTTP_CLIENT: Firmware Upgrades Failed