ESP-IDF problems with mingw/mingw32/make

Patsjemoe
Posts: 21
Joined: Wed Jul 17, 2019 11:22 am

Re: ESP-IDF problems with mingw/mingw32/make

Postby Patsjemoe » Sat Aug 10, 2019 7:04 am

hi,

thanks for your help.

I got it to work with export IDF_PATH=/c/msys32/home/user/esp-idf-v3.2.2

tried your version : export IDF_PATH="c:/msys32/home/user/esp-idf-v3.2.2"..also works

it is very confusing ...sometimes they refer to /c/, sometimes it is c:/ with ""......I took away the ""....

at last, I got this to work.

now my CMD.exe does not work anymore, but can use the mingw32. tried already blink....

now I will try esp-adf with the audio kit..hope this also works.

regards
Ludo

Patsjemoe
Posts: 21
Joined: Wed Jul 17, 2019 11:22 am

Re: ESP-IDF problems with mingw/mingw32/make

Postby Patsjemoe » Sat Aug 10, 2019 7:37 am

Hi,
I installed esp-adf in /esp directory.
copied play_mp3 directory in /esp, tried also in /esp/esp-adf ,went into play_mp3 and initiated make menuconfig

again :
$ make menuconfig
Makefile:2: /project.mk: No such file or directory
make: *** No rule to make target '/project.mk'. Stop.

$ printenv ADF_PATH
c:/msys32/home/user/esp/esp-adf
tried also
c:/msys32/home/user/esp/esp-adf/play_mp3

Still the same error

Any idea here ?

Patsjemoe
Posts: 21
Joined: Wed Jul 17, 2019 11:22 am

Re: ESP-IDF problems with mingw/mingw32/make

Postby Patsjemoe » Sat Aug 10, 2019 7:47 am

after installing esp-adf, and having the error as mentioned, I go back to esp-idf and are facing the same problem.
It looks as if the adf install is messing up with the idf install....
back to zero.....

WiFive
Posts: 2612
Joined: Tue Dec 01, 2015 7:35 am

Re: ESP-IDF problems with mingw/mingw32/make

Postby WiFive » Sat Aug 10, 2019 8:11 am

You should check both

Code: Select all

printenv ADF_PATH
printenv IDF_PATH
ADF shouldn't change IDF_PATH

Patsjemoe
Posts: 21
Joined: Wed Jul 17, 2019 11:22 am

Re: ESP-IDF problems with mingw/mingw32/make

Postby Patsjemoe » Sat Aug 10, 2019 8:26 am

path's are OK, but do not start up anymore from the profile.d directory, have to start them manually.

and before, make menuconfig in blink worked,
now, after installing the esp-adf I get the error
$ make menuconfig
Makefile:8: /make/project.mk: No such file or directory
make: *** No rule to make target '/make/project.mk'. Stop.

Patsjemoe
Posts: 21
Joined: Wed Jul 17, 2019 11:22 am

Re: ESP-IDF problems with mingw/mingw32/make

Postby Patsjemoe » Sat Aug 10, 2019 9:10 am

esp-adf is doing something weard.
when I installed this, the whole /esp/home directory cannot be deleted anymore, and it comes to 1 filed in the blink/build/include/config/smp/slave/con
This file is not accessible and cannot be deleted. I had this now 2 times.
this con file cannot be deleted in the asp directory too....
I assume, but cannot be sure, that this also causes the problem with the make menuconfig.

Who is online

Users browsing this forum: No registered users and 12 guests