Page 1 of 1

Aquacontrol32 - a 5 channel led controller.

Posted: Fri Dec 08, 2017 12:32 pm
by Cellie
The hardware:

Based on a MH-ET LIVE MiniKit ESP32.
Image
You can connect a cheap 128x64 I2C OLED and/or a ILI9341 SPI tft display to have some feedback on the display(s).
The ILI9341 displays optionally come with a XPT2046 touch controller which is supported.

Features:

-5 channels led dimming ( common anode ) at 1.22kHz with 16 bit ( 65535 steps ) resolution.

-50 timers per channel.

-Web interface to control the device.

-Automatic NTP timekeeping.

-Timezone support.

-1-Wire Maxim ( Dallas ) DS18B20 sensor support.

-I2C 128x64 SSD1306 OLED support.

-SPI 320x240 ILI9341 TFT support.

-XPT2046 touchscreen support.

-SPIFFS storage support.

-Temperature logging on SPIFFS.

-All settings are saved in NVS.

-Easily connect your controller to WiFi with the ESP8266 SmartConfig Android app.

Aquacontrol32 on GitHub.

Re: Aquacontrol32 - a 5 channel led controller.

Posted: Thu Dec 14, 2017 6:25 am
by Ronnyking
Looks very nice, I'm gonna try and use that for my lights :)