xtensa-esp32-elf-g++": file does not exist error; can't compile, please help

perigalacticon
Posts: 12
Joined: Thu Dec 07, 2017 3:59 am

Re: xtensa-esp32-elf-g++": file does not exist error; can't compile, please help

Postby perigalacticon » Mon Jan 15, 2018 3:56 pm

I have run get.exe every time. NO success.

perigalacticon
Posts: 12
Joined: Thu Dec 07, 2017 3:59 am

Re: xtensa-esp32-elf-g++": file does not exist error; can't compile, please help

Postby perigalacticon » Tue Jan 16, 2018 5:59 pm

Ok, I had to completely delete all of the Arduino folders and everything in them after uninstalling the IDE. Now it is working properly when installed per the directions, although the website STILL incorrectly says the sketchbook directory is C:\Users\[USER NAME]\Documents\Arduino\. Thanks for the help.

chegewara
Posts: 463
Joined: Wed Jun 14, 2017 9:00 pm

Re: xtensa-esp32-elf-g++": file does not exist error; can't compile, please help

Postby chegewara » Tue Jan 16, 2018 6:31 pm

chegewara wrote:It works.
arduino.PNG



If you cant make it to work maybe just reinstall arduino and all libraries (espressif/arduino-esp32 too). I know few users that got issues with arduino-ide and they got fresh installations and problems gone.


2 weeks ago

perigalacticon
Posts: 12
Joined: Thu Dec 07, 2017 3:59 am

Re: xtensa-esp32-elf-g++": file does not exist error; can't compile, please help

Postby perigalacticon » Tue Jan 16, 2018 7:51 pm

chegewara - do you have a problem with that?

Rogutek
Posts: 1
Joined: Sat Mar 03, 2018 7:46 am

Re: xtensa-esp32-elf-g++": file does not exist error; can't compile, please help

Postby Rogutek » Sat Mar 03, 2018 8:11 am

I am having this problem as well. error posted below.

Arduino: 1.8.5 (Windows 10), Board: "ESP32 Dev Module, QIO, 80MHz, 4MB (32Mb), 921600, None"

exec: "C:\\Users\\user\\Documents\\Arduino\\hardware\\espressif\\esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++": file does not exist
Error compiling for board ESP32 Dev Module.

However, "C:\\Users\\user\\Documents\\Arduino\\hardware\\espressif\\esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++" Does, in fact, exist, and it exists where the client says it should be.

help?

side note, other arduino devices connect and operate normally.

y1nG_Mr
Posts: 1
Joined: Wed May 23, 2018 1:40 am

Re: xtensa-esp32-elf-g++": file does not exist error; can't compile, please help

Postby y1nG_Mr » Wed May 23, 2018 1:46 am

install Arduino\hardware\espressif\esp32\tools\get.exe
hope can help you

Who is online

Users browsing this forum: No registered users and 3 guests