Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

mrtom31@hotmail.fr
Posts: 1
Joined: Tue May 11, 2021 8:29 pm

Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

Postby mrtom31@hotmail.fr » Wed May 12, 2021 2:25 pm

Hello,

I can avoid getting

Code: Select all

Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
when I want to flash esp32cam with esp-prog.

I updated usb driver with zadig to WinUSB v6.1.7600.X:
Image
Image

But I am still getting this error.

I compile through platformIO and the flashing isn't stable, sometimes I have this output:

Code: Select all

Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
** Programming Started **
** Programming Finished **
** Verify Started **
** Verified OK **
** Programming Started **
** Programming Finished **
** Verify Started **
** Verified OK **
** Programming Started **
** Programming Finished **
** Verify Started **
** Verified OK **
shutdown command invoked
=================================================================================================== [SUCCESS] Took 62.58 seconds ===================================================================================================

Terminal will be reused by tasks, press any key to close it.
Sometimes I have this one:

Code: Select all

Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
** Programming Started **
Error: timed out while waiting for target halted / 4 - 2
Error: xtensa_wait_algorithm: not halted 0, pc 0x40090068, ps 0x60025
Error: Failed to wait algorithm (-302)!
Error: Algorithm run failed (-302)!
*** [upload] Error 3221225477
How to workaround it?

Thanks

davidjmstewart
Posts: 1
Joined: Sat Jul 31, 2021 3:18 am

Re: Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

Postby davidjmstewart » Sat Jul 31, 2021 3:20 am

I am in exactly the same situation as you with my DevkitC_V4. Did you resolve this issue?

Who is online

Users browsing this forum: No registered users and 78 guests