Unable to select board "ESP32 Arduino" on Arduino IDE although the menu item is there

huaxiaozhong1
Posts: 16
Joined: Sun Feb 25, 2018 12:12 pm

Unable to select board "ESP32 Arduino" on Arduino IDE although the menu item is there

Postby huaxiaozhong1 » Wed Mar 14, 2018 6:48 am

Greeting!
Following "Installation instructions for Debian / Ubuntu OS" of https://github.com/espressif/arduino-es ... _ubuntu.md, folder "espressif/esp32" was added into both "~/Arduino/hardware" and "~/arduino-1.8.5/hardware".
According to "Arduino IDE 1.5 3rd party Hardware specification" of https://github.com/arduino/Arduino/wiki ... cification, the board name "ESP32 Arduino" has been created at the file "platfomr.txt" under folder "espressif/esp32" . And when we re-opened Arduino IDE -> Tools -> Board .., we could see a new menu item, which is "ESP32 Arduino". But we are not able to select it :-(
Is it an issue? If yes, how to fix it?
Now we have to select the board "ESP Dev Module", is it OK?
But it seems to me that a few exceptional errors happen. I am searching the reasons... May report them on another case soon :-)
Thanks!

huaxiaozhong1
Posts: 16
Joined: Sun Feb 25, 2018 12:12 pm

Re: Unable to select board "ESP32 Arduino" on Arduino IDE although the menu item is there

Postby huaxiaozhong1 » Wed Mar 21, 2018 7:11 am

Hi, I am selecting "esp32 dev module". It brought some issues to our development, but haven't blocked ours :-) So, you could put the case into a lower priority for the time being :-)

Who is online

Users browsing this forum: No registered users and 59 guests