ESP32-S2-MINI-1 - External Interrupts

Nikosant03
Posts: 12
Joined: Wed Mar 13, 2019 11:44 pm

ESP32-S2-MINI-1 - External Interrupts

Postby Nikosant03 » Tue Apr 27, 2021 8:58 am

Hi everyone,

I want to intergrate the ESP32-S2-MINI-1 module to my design. My design requires 18 external interrupts and looking the datasheet of the ESP32-S2-MINI-1 module I see that there are available 25 gpios. However what it is not mentioned is what gpios can be used as external interrrupts... I should assume that every gpio could be used for this purpose?

https://www.espressif.com/sites/default ... eet_en.pdf

With that been said could I use any of the IO pin as external interrupt? The following capture is from the datasheet

Image

Thanks
Nick

Nikosant03
Posts: 12
Joined: Wed Mar 13, 2019 11:44 pm

Re: ESP32-S2-MINI-1 - External Interrupts

Postby Nikosant03 » Mon May 03, 2021 7:31 am

Anyone?

ESP_Sprite
Posts: 8921
Joined: Thu Nov 26, 2015 4:08 am

Re: ESP32-S2-MINI-1 - External Interrupts

Postby ESP_Sprite » Thu May 06, 2021 3:00 am

From what I can read in the TRM, yes. Each IO pin has an IO matrix entry that allows you to enable an interrupt on it.

Nikosant03
Posts: 12
Joined: Wed Mar 13, 2019 11:44 pm

Re: ESP32-S2-MINI-1 - External Interrupts

Postby Nikosant03 » Thu May 06, 2021 7:22 am

Thank you ESP_Sprite!!

User avatar
rudi ;-)
Posts: 1698
Joined: Fri Nov 13, 2015 3:25 pm

Re: ESP32-S2-MINI-1 - External Interrupts

Postby rudi ;-) » Fri May 07, 2021 3:23 pm

Nikosant03 wrote:
Thu May 06, 2021 7:22 am
Thank you ESP_Sprite!!
use the S2 TRM for the S2-Mini instead the C3-TRM which was linked in the post

ESP32-S2 TRM
-------------------------------------
love it, change it or leave it.
-------------------------------------
問候飛出去的朋友遍全球魯迪

ESP_Sprite
Posts: 8921
Joined: Thu Nov 26, 2015 4:08 am

Re: ESP32-S2-MINI-1 - External Interrupts

Postby ESP_Sprite » Mon May 10, 2021 3:15 am

Oops. Been doing too much with the C3 I guess, when I read 'mini', I see that chip.

Nikosant03
Posts: 12
Joined: Wed Mar 13, 2019 11:44 pm

Re: ESP32-S2-MINI-1 - External Interrupts

Postby Nikosant03 » Thu May 13, 2021 8:04 am

[/quote]
use the S2 TRM for the S2-Mini instead the C3-TRM which was linked in the post
[/quote]

I noticed that, thanks!!

Who is online

Users browsing this forum: No registered users and 106 guests