VOIP example URI format

Posts: 1
Joined: Fri Feb 21, 2020 7:42 pm

VOIP example URI format

Postby Philips1 » Fri Feb 21, 2020 8:01 pm

I'm trying to test the VOIP example by linphone using the ESP32-LyraT-Mini V1.2 hardware but encountered this error message when I execute the VOIP application:

I (13278) AUDIO_HAL: Codec mode is 3, Ctrl:1
I (13288) VOIP_EXAMPLE: [ 3 ] Create and start input key service
I (13288) VOIP_EXAMPLE: [ 4 ] Create SIP Service
W (13288) SIP: Invalid scheme
I (13298) VOIP_EXAMPLE: [ 5 ] Create decoder and encoder pipelines
E (13308) SIP: Error transport is NULLED
I (13308) SIP: SIP task stoped

Wifi was connected with no error. I entered "sip:name@sip.linphone.org" as the SIP URI in menuconfig. Does anyone know if the URI format I entered was correct? Any ideas is appreciated. Many thanks.


Posts: 2
Joined: Wed Feb 26, 2020 8:58 pm

Re: VOIP example URI format

Postby Captainavi » Thu Feb 27, 2020 1:36 am

I have the voip registration working with a local Yate server.
My SIP URI is "udp://200:002@"

For standard port and network protocol.


Who is online

Users browsing this forum: No registered users and 6 guests