Mesh network with multiple routers

tnyqu6
Posts: 1
Joined: Mon Nov 02, 2020 9:20 pm

Mesh network with multiple routers

Postby tnyqu6 » Mon Nov 02, 2020 9:30 pm

Hi.

I want to use the ESP32 to set up a mesh network of 100-500 nodes in a building with multiple routers with different BSSID but the same SSID. Ideally, each node would join the mesh network with the best signal strength. If a router went down, the connected nodes would automatically join other existing nodes. Would this be handled automatically by the ESP-MESH stack? If not, is it possible to configure the firmware to do so?

Thanks,

rrelande
Posts: 6
Joined: Thu Apr 08, 2021 8:51 pm

Re: Mesh network with multiple routers

Postby rrelande » Thu Apr 08, 2021 8:58 pm

this question is extremly relevant as the mdf creates a stable, self healing network.
however the only remaining single point of failure is the router and there should be a way to have a fallback router for un-interrupted connectivity.

how can it be provided?

greengnu
Posts: 27
Joined: Wed May 08, 2019 8:45 pm

Re: Mesh network with multiple routers

Postby greengnu » Wed Jun 23, 2021 8:32 am

I second this.

Even better, there should be load balancing across multiple routers

Who is online

Users browsing this forum: No registered users and 27 guests