DIY 基于 ESP32 的 PDP-11 迷你计算机 ,需要啥 屏幕?

zzsczz
Posts: 1
Joined: Wed Feb 08, 2023 1:29 pm

DIY 基于 ESP32 的 PDP-11 迷你计算机 ,需要啥 屏幕?

Postby zzsczz » Wed Feb 08, 2023 2:19 pm

官网新闻 查到
https://www.espressif.com.cn/zh-hans/ne ... red_PDP-11


https://spritesmods.com/?art=minipdp11&page=4
有简介
I found a really nice 1.8" 320x240 LCD on Taobao that happened to have the same controller as my devboard.........

据说 标准 ESP-Wrover-Kits 带lcd支持 。我去 ESP32的 淘宝网站搜了的, 官方店铺ESP-Wrover-Kits VE没有屏幕



我去github 上 查了 项目
https://github.com/spritetm/esppdp

被墙掉了具体是啥也不清楚

有没有大神推荐屏幕? 屏幕控制器 是啥型号?

ESP_Sprite
Posts: 8884
Joined: Thu Nov 26, 2015 4:08 am

Re: DIY 基于 ESP32 的 PDP-11 迷你计算机 ,需要啥 屏幕?

Postby ESP_Sprite » Thu Feb 09, 2023 1:23 am

Hi! Apologies for responding in English, my Chinese is not that good.

The LCD is a KD018QVFMN010. I got it here.

As you noticed, the firmware also runs on an ESP-Wrover-Kit board; you can select if you want that or the PCB I designed in menuconfig. From what I can tell, that devkit always comes with a LCD, but it's on the 'underside', refer to the 2nd picture on the Taobao store.

Who is online

Users browsing this forum: No registered users and 6 guests