ESP32_S3_WROOM_1_N4R2 工作电源纹波问题

xbdpn@163.com
Posts: 1
Joined: Thu Mar 16, 2023 5:34 am

ESP32_S3_WROOM_1_N4R2 工作电源纹波问题

Postby xbdpn@163.com » Thu Mar 16, 2023 5:43 am

ESP32模块使用5V转3V3的LDO供电,LDO支持1A电流,不工作时基本无纹波,目前模块在工作中纹波非常大,而请帮忙分析下是什么原因?有增加过200UF的钽电容。
Attachments
图2.jpg
3V3电源纹波
图2.jpg (99.23 KiB) Viewed 1792 times
图1.png
供电原理图
图1.png (8.8 KiB) Viewed 1792 times

water10735
Posts: 1
Joined: Mon Mar 20, 2023 1:26 am

Re: ESP32_S3_WROOM_1_N4R2 工作电源纹波问题

Postby water10735 » Mon Mar 20, 2023 1:33 am

您好,

我也有遇到相同的問題,
架構也是5V的LDO轉3.3V,EN腳搭配上拉10K與1uF電容,
希望有相關經驗的人可以分享一下經驗,謝謝!!
Attachments
scope_0 (2).png
scope_0 (2).png (46.43 KiB) Viewed 1778 times

ESP_LJH
Posts: 384
Joined: Tue May 18, 2021 9:21 am

Re: ESP32_S3_WROOM_1_N4R2 工作电源纹波问题

Postby ESP_LJH » Fri Mar 24, 2023 12:08 pm

是不是在发包,这样瞬间的电流电源芯片可能响应不够,只能再增大电容看看,或者试试别的电源芯片。

哈哈大笑015
Posts: 1
Joined: Mon May 15, 2023 12:37 pm

Re: ESP32_S3_WROOM_1_N4R2 工作电源纹波问题

Postby 哈哈大笑015 » Mon May 15, 2023 12:38 pm

请问问题解决了吗?我现在也遇到相同的问题,无法解决,求援

Who is online

Users browsing this forum: No registered users and 10 guests