How to install and use Eclipse properly to build example codes

PSTechPaul
Posts: 13
Joined: Wed Nov 03, 2021 10:24 pm

Re: How to install and use Eclipse properly to build example codes

Postby PSTechPaul » Tue Dec 14, 2021 9:20 pm

I was unable to send the AT setup commands properly from my PIC USART to the ESP32 module. When I sent the first command it always responded with "ERROR". So I was able to modify one of my HC-05 modules to work on 3.3 VDC, and with no further setup I was able to send and receive characters at the default 9600 baud. It still didn't work with my Toshiba Win10 laptop, but the Android phone Bluetooth terminals worked just fine. So I won't be using the ESP32 modules for this project, although I might revisit this later.

esp-qing
Posts: 1
Joined: Tue Mar 05, 2024 9:06 am

Re: How to install and use Eclipse properly to build example codes

Postby esp-qing » Tue Mar 05, 2024 12:01 pm

Hi, PSTechPaul, Sorry for replying so late. May I ask if your problem has been resolved? If you are still using ESP32, feel free to raise any questions you have at any time.

Who is online

Users browsing this forum: No registered users and 62 guests