![Neutral :|](./images/smilies/icon_neutral.gif)
So I created my own timer for update, but the same error message kept showing: "E (6309) esp_rmaker_param: Current time not yet available. Cannot report time series data."
The board I am using is ESP32-C3 and here is the code. I have done several debugging and found out that the program cannot execute this statement: if (interruptCounter > 0 && wifi_connected) {}. Can anyone help me to see what is the problem? So many thanks
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Code: Select all
#include "RMaker.h"
#include "WiFi.h"
#include "WiFiProv.h"
#include <wifi_provisioning/manager.h>
// Set Defalt Values
#define DEFAULT_RELAY_MODE true
// BLE Credentils
const char *service_name = "AB_1";
const char *pop = "1234567";
// GPIO
static uint8_t gpio_reset = 0;
static uint8_t relay = 10;
bool relay_state = true;
bool wifi_connected = 0;
//Ultrasonic Sensor
#define echoPin 18
#define trigPin 19
//Timer
volatile int interruptCounter;
int totalInterruptCounter;
hw_timer_t * timer = NULL;
portMUX_TYPE timerMux = portMUX_INITIALIZER_UNLOCKED;
void IRAM_ATTR onTimer() {
portENTER_CRITICAL_ISR(&timerMux);
interruptCounter++;
portEXIT_CRITICAL_ISR(&timerMux);
}
//------------------------------------------- Declaring Devices -----------------------------------------------------//
//The framework provides some standard device types like switch, lightbulb, fan, temperature sensor.
static TemperatureSensor ultrasonic("Water Level");
static Switch my_switch("Heater", &relay);
void sysProvEvent(arduino_event_t *sys_event)
{
switch (sys_event->event_id) {
case ARDUINO_EVENT_PROV_START:
#if CONFIG_IDF_TARGET_ESP32
Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
printQR(service_name, pop, "ble");
#else
Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on SoftAP\n", service_name, pop);
printQR(service_name, pop, "softap");
#endif
break;
case ARDUINO_EVENT_WIFI_STA_CONNECTED:
Serial.printf("\nConnected to Wi-Fi!\n");
wifi_connected = 1;
delay(500);
break;
case ARDUINO_EVENT_PROV_CRED_RECV: {
Serial.println("\nReceived Wi-Fi credentials");
Serial.print("\tSSID : ");
Serial.println((const char *) sys_event->event_info.prov_cred_recv.ssid);
Serial.print("\tPassword : ");
Serial.println((char const *) sys_event->event_info.prov_cred_recv.password);
break;
}
case ARDUINO_EVENT_PROV_INIT:
wifi_prov_mgr_disable_auto_stop(10000);
break;
case ARDUINO_EVENT_PROV_CRED_SUCCESS:
Serial.println("Stopping Provisioning!!!");
wifi_prov_mgr_stop_provisioning();
break;
}
}
void write_callback(Device *device, Param *param, const param_val_t val, void *priv_data, write_ctx_t *ctx)
{
const char *device_name = device->getDeviceName();
Serial.println(device_name);
const char *param_name = param->getParamName();
if (strcmp(device_name, "Heater") == 0)
{
if (strcmp(param_name, "Power") == 0)
{
Serial.printf("Received value = %s for %s - %s\n", val.val.b ? "true" : "false", device_name, param_name);
relay_state = val.val.b;
(relay_state == false) ? digitalWrite(relay, LOW) : digitalWrite(relay, HIGH);
param->updateAndReport(val);
}
}
}
void setup()
{
Serial.begin(115200);
//Timer
timer = timerBegin(0, 80, true);
timerAttachInterrupt(timer, &onTimer, true);
timerAlarmWrite(timer, 5000000, true);
timerAlarmEnable(timer);
// Configure the input GPIOs
pinMode(gpio_reset, INPUT);
pinMode(relay, OUTPUT);
digitalWrite(relay, DEFAULT_RELAY_MODE);
//Ultrasonic Sensor
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
//------------------------------------------- Declaring Node -----------------------------------------------------//
Node my_node;
my_node = RMaker.initNode("Aquaponics_System");
//Standard switch device
my_switch.addCb(write_callback);
//------------------------------------------- Adding Devices in Node -----------------------------------------------------//
my_node.addDevice(my_switch);
my_node.addDevice(ultrasonic);
//This is optional
RMaker.enableOTA(OTA_USING_PARAMS);
//If you want to enable scheduling, set time zone for your region using setTimeZone().
//The list of available values are provided here https://rainmaker.espressif.com/docs/time-service.html
//RMaker.setTimeZone("Asia/Hong_Kong");
// Alternatively, enable the Timezone service and let the phone apps set the appropriate timezone
RMaker.enableTZService();
RMaker.enableSchedule();
Serial.printf("\nStarting ESP-RainMaker\n");
RMaker.start();
WiFi.onEvent(sysProvEvent);
#if CONFIG_IDF_TARGET_ESP32
WiFiProv.beginProvision(WIFI_PROV_SCHEME_BLE, WIFI_PROV_SCHEME_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, pop, service_name);
#else
WiFiProv.beginProvision(WIFI_PROV_SCHEME_SOFTAP, WIFI_PROV_SCHEME_HANDLER_NONE, WIFI_PROV_SECURITY_1, pop, service_name);
#endif
}
void loop()
{
if (interruptCounter > 0 && wifi_connected) {
Serial.println("Sending Sensor's Data");
portENTER_CRITICAL(&timerMux);
interruptCounter--;
portEXIT_CRITICAL(&timerMux);
totalInterruptCounter++;
Send_UltraSensor();
}
//----------------------------------------------------------- Logic to Reset RainMaker
// Read GPIO0 (external button to reset device
if (digitalRead(gpio_reset) == LOW) { //Push button pressed
Serial.printf("Reset Button Pressed!\n");
// Key debounce handling
delay(100);
int startTime = millis();
while (digitalRead(gpio_reset) == LOW) delay(50);
int endTime = millis();
if ((endTime - startTime) > 10000) {
// If key pressed for more than 10secs, reset all
Serial.printf("Reset to factory.\n");
wifi_connected = 0;
RMakerFactoryReset(2);
} else if ((endTime - startTime) > 3000) {
Serial.printf("Reset Wi-Fi.\n");
wifi_connected = 0;
// If key pressed for more than 3secs, but less than 10, reset Wi-Fi
RMakerWiFiReset(2);
}
}
delay(100);
}
void Send_UltraSensor()
{
int TankDepth = 31;
digitalWrite(trigPin, LOW);
delayMicroseconds(2);
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
long duration = pulseIn(echoPin, HIGH);
float distance = duration * 0.034 / 2;
float WaterLevel = TankDepth - distance;
Serial.print(WaterLevel);
ultrasonic.updateAndReportParam("Temperature", distance);
delay(1000);
}