ESP32-WROVER module compatibility

newhobby
Posts: 35
Joined: Sun Aug 19, 2018 4:36 am

ESP32-WROVER module compatibility

Postby newhobby » Fri Jun 19, 2020 5:05 pm

Hi,

I would like to know if these two are pin compatible and what the difference between them.
https://www.digikey.com/products/en?key ... -1015-1-ND
https://www.digikey.com/product-detail/ ... D/11613147

Thanks,
RI

WiFive
Posts: 3529
Joined: Tue Dec 01, 2015 7:35 am

Re: ESP32-WROVER module compatibility

Postby WiFive » Sat Jun 20, 2020 9:59 am

ESP32-WROVER-E is newer. Same footprint, pinout doesnt have gpio6-11, 3.3v flash/psram and esp32 rev3 chip. Read the datasheets.

newhobby
Posts: 35
Joined: Sun Aug 19, 2018 4:36 am

Re: ESP32-WROVER module compatibility

Postby newhobby » Sun Jun 21, 2020 10:29 pm

We can't use the pins on the older Wrover anyway, so no problems there.
The reason I am asking is because Digikey doesn't have the older one anymore. Are they going to be EOL?
To me it seems the newer one is direct replacement.
Should I expect any problems using the new one to replace the older one?

Who is online

Users browsing this forum: No registered users and 53 guests