can't run the original demo on ESP32-S2-Kaluga-1 DK

[jimmywong2003]

Hi ESP32 guy,

Recently, I bought the ESP32-S2-Kaluga-1 DK board v1.3 version.

I clone the version of https://github.com/espressif/esp-idf.

e.g. d:\esp32\esp-idf

Also,

I clone the S2-Kaluga DK from https://github.com/espressif/esp-dev-kits

e.g. d:\esp32\esp-32\

Point 1:

First, if I install the https://dl.espressif.com/dl/esp-idf-tools-setup-2.3.exe for windows,

but I found that its idf.py doesn't support "set-target esp32s2".

Thus, I can't program (bootloader) on the dk board if just using the idf.py.

Because it can't detect the target board (idf.py -p com26)... error code : timeout

It is better to mention the minimum requirement tools if working for ESP32-S2-Kaluga-1 DK board v1.3.

Point 2:

I try to use the D:\esp32\esp-idf\install.bat to install the tools.

Suggestion (this install.bat can't let the user to specify the tool path).

The default is C:\Users\XXX\.espressif path.

Point 3:

I use the example LCD/Camera from (https://github.com/espressif/esp-dev-kits).

I can't find another release tag on this github. Can you give us the release zip package on particular HW version?

The factory binary file

D:\esp32\esp32-s2\esp32-s2-kaluga-1\examples\factory

it doesn't contain any readme file to specify how to use them (such as address).

Point 4:

I modified the sdkconfig file inside the LCD.

# Example Configuration
#
CONFIG_LCD_PAD_ESP32_S2_KALUGA_V1_3=y
# CONFIG_LCD_PAD_ESP32_S2_KALUGA_V1_2 is not set
# CONFIG_LCD_PAD_ESP32_S2_KALUGA_V1_1 is not set
CONFIG_LCD_ST7789=y
# CONFIG_LCD_ILI9341 is not set
# end of Example Configuration

but I can't see any jpg on the screen.

I would like to get the working package such as release tag to run on the ESP32-S2-Kaluga-1 DK board v1.3.

Thanks.

Jimmy

[meltdown03]

Where did you purchase the v1.3 Kaluga if I may ask?

[jimmywong2003]

订单号: 1159666787956469136
I bought from taobao (official espressif retail).
https://item.taobao.com/item.htm?spm=a1 ... p951qbfcfe

[jimmywong2003]

Hi,

Can you give me the official working repo or package to run on such HW version of the DK board?

Thanks

Jimmy

[ESP_czw]

please choose master branch

[jimmywong2003]

git status

esp32_s2.png (69.79 KiB) Viewed 6545 times

I have used the master branch. The problem is still there.

D:\esp32\esp32-s2\esp-dev-kits (master -> origin)
λ git pull
Already up to date.

D:\esp32\esp32-s2\esp-dev-kits (master -> origin)
λ git status
On branch master
Your branch is up to date with 'origin/master'.

Would I get the tag release to work on the DK board?

git status

esp32_s2.png (69.79 KiB) Viewed 6545 times

[ESP_czw]

The branch of IDF selects master，Because IDF's master (more than 4.2 ) supports ESP32S2

[ESP_czw]

1. IDF checkout master
2.

Code: Select all

rm -rf build

and

Code: Select all

set-target esp32s2