ESP32无法刷入固件 单片机不断重启请问有什么方法解决

flashtttt
Posts: 1
Joined: Mon Jul 01, 2019 7:08 am

ESP32无法刷入固件 单片机不断重启请问有什么方法解决

Postby flashtttt » Mon Jul 01, 2019 7:17 am

esp32刷入micropython固件 写了个死循环后 重新上电发现esp32不能正常连接wifi 重刷固件时不能正常进入下载模式,多次尝试后刷入了固件 但还是不能正常使用 尝试了擦出 刷入固件3 4次后 出现了不断复位的情况 再次擦出芯片后 出现了不能进入下载模式 使用esptool.py和flash_downlode_toos都不能下载
开发板为 nodeMCU 芯片为 ESP32-WROOM-32

Who is online

Users browsing this forum: No registered users and 18 guests